Installing The Appliance - Smeg CX51GVE Manual

3 INSTALLING THE APPLIANCE

The appliance must be installed by a qualified technician and according to the regulations in force.
Depending on the type of installation, it belongs to class 1 (Fig.A) or to class 2-subclass 1 (Fig.B-C).
This appliance may be installed next to walls, one of which must be higher than the appliance, at a
minimum distance of 50 mm from the side of the appliance, as shown in drawings A and B relative to
the installation classes. Any wall units or ventilation hoods must be at a distance of at least 750 mm
above the appliance.
Appliances equipped with gas cylinder compartment and electric oven can only be installed
as free-standing (see fig. B).
34
Instructions for the installer
A
Built-in appliance
A
Built-in appliance
C
B
Free-standing installation
Free-standing installation
B