Daily Cleaning Of Filters; Routine Inspection Of The Spray Arms (Once A Week) - Smeg CWH510D Manual

8.1 Daily cleaning of filters
Cleaning the filter at the end of each working day
Remove the filters (simply lift them out as shown here), taking care
that no large residues fall into the sump underneath. Clean them to
remove residues and rinse with plenty of water, then put them
correctly back in place; do not use sharp or pointed tools.
Clean away any limescale deposits to prevent excessive build‐ups;
8.2 Routine inspection of the spray arms (once a week)
Remove the top and bottom spray arms by unscrewing the central screw and unscrew the caps from the
ends of the rinsing arms as shown. Do not unscrew the nozzles. Clean the holes and nozzles under a jet
of clean running water; do not use tools which might cause damage. Reassemble the spray arms with
care.
TOP SPRAY ARMS plastic
TOP SPRAY ARMS stainless
steel
1
‐ CWH 510 D
BOTTOM SPRAY ARMS
plastic
BOTTOM SPRAY ARMS
stainless steel
1
27
1
2
3