Installation And Positioning; Instructions For Technical Staff; Plumbing Hookup - Smeg CWH510D Manual

Professional dishwasher
Table of Contents

Advertisement

 
 

3 INSTALLATION AND POSITIONING

INSTALLATION and POSITIONING 
 
Bring the dishwasher to the installation site, remove the packaging and check the appliance and 
components for damage; any damage found must be reported to the transporter in writing. 
The packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach 
of children and pets since they are potentially dangerous.. All packaging materials used are 
environment‐friendly. They can be kept without constituting any hazard, or may be disposed of at a 
specialist waste disposal centre. The plastic components suitable for recycling are marked as follows: PE 
polyethylene: external packaging film, bag containing the instructions, protective bags. PP 
polypropylene: straps. PS expanded polystyrene: corner guards, top of packaging. Wooden and 
cardboard components can be disposed of in accordance with the relevant regulations. When the 
product is decommissioned it must not be dumped in the environment; it must be disposed of in 
accordance with the relevant regulations. All metal parts are in stainless steel and can be removed. The 
plastic parts are marked with the symbol identifying the material used. 
 
 
 
 
 POSITIONING: 
 
Caution: the indoor system and premises in which equipment for institutions is installed 
 
must comply with the relevant regulations. 
The manufacturer declines all liability for direct or indirect injury or damage deriving from failure 
to comply with these regulations. 
Before  installation,  check  that  there  are  no  objects  or  materials  in  the  vicinity  which  may  be 
damaged by steam or splashes of washing solution, or that any such items are suitably protected.  
Place the dishwasher in the chosen point and remove the protective film. 
Level the dishwasher (with the aid of a spirit level) on its adjustable feet to ensure that it is stable; 
all other mounting solutions must be approved by the manufacturer. 
 

4 INSTRUCTIONS FOR TECHNICAL STAFF

4.1 Plumbing hookup 
 
Water supply and drain connection 
 
‐ CWH 510 D 

Advertisement

Table of Contents
loading

Table of Contents