Table of Contents
Advertisement
To replace an optical drive:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Remove the front bezel. Refer to "Removing the front bezel".
Step 3.
Remove the top front bezel. Refer to "Removing the top front bezel".
Step 4.
Disconnect the data and power cables from the rear of the optical drive.
Step 5.
Press the release button and push the optical drive straight out of the front of the chassis.
Step 6.
Slide the new optical drive into the bay from the front until it snaps into position.
Step 7.
Connect the data and power cables to the new disk drive.
Step 8.
Reattach the front bezel and computer cover.
Replacing a graphics card
Note: For this procedure, it helps to lay the computer flat.
To replace a graphics card:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Follow the below steps to remove a graphics card:
32
IdeaCentre 710 Series
a
b c
Advertisement
Table of Contents
