Table of Contents
Advertisement
Harrier series
6
Intended use
The Harrier series air conditioner are designed for installation on the roof of a
caravan or recreational vehicle to provide reverse cycle heating and cooling.
The device is intended for vehicles with roofs that are from 30 to 100 mm thick.
The device must be installed so that it is within ±10° of the horizontal plane. It is
not suitable for houses and apartments.
The roof air conditioner is not suitable for installation in construction machines,
agricultural machines or similar equipment. It will not work properly if exposed
to strong vibrations.
The function of the roof air conditioner is guaranteed for temperatures between
–2 °C and 52 °C.
I
NOTE
You can find additional information on roof air conditioners in the operating
manual, such as the technical description or the controls.
7
Labels
2
3
Labels are attached to the Harrier series roof air conditioners. These labels
provide the user and fitter with information on specifications of the device.
The roof air conditioner label is located on the side of the electronics box and can
be seen through the side vent. The ADB label is located inside the centre cover.
EN
More information https://www.caravansplus.com.au
Product data label location
on roo op unit
ADB data label
inside the ADB
centre cover
Intended use
7
Advertisement
Table of Contents
