Safety And Installation Instructions; Scope Of Delivery; Intended Use - Dometic Car Plissee FL Installation And Operating Manual

Safety and installation instructions

2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the
vehicle manufacturer and service workshops.
I
NOTE
If you do not have sufficient technical knowledge for installing the
components in vehicles, you should have a specialist install the pleated
blind in your vehicle.
3

Scope of delivery

No. in
Description
fig. 1
1 Pleated blind
2 Cover caps
3 Fastening bolts 3.9 x 16 mm
4

Intended use

The pleated blind is suitable for installation in S7P wall window.
The pleated blind is designed for a wall thickness of 26 mm.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
4
Car Plissee FL
EN