Sony UP-860 Operating Instructions Manual page 2

Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Owner's Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. Serial No.
For the model UP-860CE
x This symbol attached to the equipment indicates that
the unit is classified as Type B equipment in accordance
with the definition specified by IEC publication 601-1.
(Safety of Medical Electrical Equipment)
This unit provides an adequate degree of protection against
electric shock particularly regarding
— allowable leakage currents;
— reliability of the protective earth connection
Warning
To pevent fire or shock hazard, do not expose the unit to
rain or moisture.
To pevent electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
For the customers in the U.S.A.
Warning — This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in
accordance with the instructions manual, may cause
interference to radio commuinications. It has been tested
and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against such
interference when operated in a commecial environment.
Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own
expense will be required to take whatever measures may be
required to correct the interference.
The shielded interface cable recommended in this manual
must be used with this equipment in order comply with the
limits for a computing device pursuant to Subpart J of Part
15 of FCC Rules.
For the customers in Canada
This apparatus complies with the Class A limits for radio
noise emissions set out in Radio interferene Regulations.
For the Customers in the United Kingdom
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-yellaow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol £ or coloured green or
green-and-yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.