Remove The Pogo Pin With Cable - Lenovo 13ITL6 Hardware Maintenance Manual

Figure 31. Separate the ToF cable from the ToF board.
Go to https://support.lenovo.com/partslookup
replacement parts:
ToF cable
ToF board

Remove the pogo pin with cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 28
"Remove the battery pack" on page 32
Step 1. Disconnect the pogo pin cable from the system board. Remove two screws and then remove the
pogo pin with cable.
Figure 32. Disconnect the pogo pin cable from the system board and remove the pogo pin with cable.
Screw specifications
M2 x L3.2
Go to
https://support.lenovo.com/partslookup
part:
to look up the Lenovo part numbers of the following
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
43