Table of Contents
Advertisement
Figure 31. Remove the system board module
Screw specifications
M2.0 x L3.5
Go to
https://support.lenovo.com/partslookup
replacement parts:
System board
Remove the USB board cable (61 pin)
After removing the system board module, do the following steps:
Step 1.
Disconnect the USB board cable from the system board and then remove the USB board cable (61
pin).
Figure 32. Remove the USB board cable (61 pin)
Go to
https://support.lenovo.com/partslookup
part:
USB board cable (61 pin)
Remove the USB board cable (62 pin) and the USB board cable bracket 2
After removing the system board module, do the following steps:
Step 1.
Remove one screw and then remove the USB board cable bracket 2.
Number of screws
3
to look up the Lenovo part numbers of the following
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
45
Advertisement
Table of Contents
