Maintenance, Date And Time Menus - Weil-McLain SlimFit 2 Series Manual

SlimFit Series 2
®

MAINTENANCE, DATE AND TIME menus

Figure 72
MAINTENANCE, DATE AND TIME menus — navigation (see Figure 58, page 66 for access information)
Maintenance Info
Name
Phone
Model
CP Number
Installed
Last Date
Next Date
Interval Settings
Reset Reminder
Set Time and Date
Year
Month
Day
Hour
Minute
MAINTENANCE INFO
1. Use this section to enter contractor's information, CP number, install date and to enter an automatic notice for maintenance (default
is 12 months). Because this shows on the display, it is an automatic means of notifying the homeowner of need for scheduled
maintenance by the technician. Select RESET REMINDER to reset for the next maintenance date.
SET TIME AND DATE
1. Enter current date and time. This allows correct maintenance reminder timing and provides date and time stamp for lockout his-
tories on ERROR screen in Diagnostic Menu.
78
commercial condensing gas
Contractor name to appear in maintenance reminders and during lockouts
Contractor phone number
Displays the boiler model selected in the boiler setup
Enter the CP# of the boiler
Enter the date the boiler was installed
Date automatically entered when Reset Reminder is chosen by contractor
Date automatically calculated when Reset Reminder is selected by contractor
Contractor selects maintenance reminder frequency based on service history
Contractor selects this to update Last maintenance Date and Next Date. Homeowner uses this to ignore the
reminder and update only the Next Date
Set year (homeowner or contractor)
Set month (homeowner or contractor)
Set day (homeowner or contractor)
Set hour (homeowner or contractor)
Set minute (homeowner or contractor)
— Boiler Manual
-
fired water boiler
Comment
Part number 550-100-561/0224