Hardware Overview; Leds; Connections - D-Link DAP-X3060 User Manual

Section 1 - Product Overview
Solid Red
1 Power/Status Blinking Red
Solid Green
D-Link DAP-X3060 User Manual

Hardware Overview

LEDs

1
Indicates the access point has malfunctioned.
This LED will blink during boot-up.
Indicates that the DAP-X3060 is working
properly.

Connections

2 Console Port RJ45 console port for debug
Connect to a Power over Ethernet (PoE) switch or router via
3
LAN (PoE) Port
an Ethernet cable.
Connect the supplied power adapter. (*Note: no longer
4 Power Receptor
used, replaced by PoE)
2 3 4
7