D-Link DAP-X3060 User Manual page 47

Section 3 - Configuration
Get IP From:
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-X3060. When Dynamic IP (DHCP) is
selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
IP Address:
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Gateway:
Enter the IP address of the gateway/router in your
network.
DNS:
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Radius Server:
Enter the RADIUS server's IP address here
Radius Port:
Enter the RADIUS server's port number here
Radius Port:
Enter the RADIUS server's shared secret here
Remote Radius Type: Select the remote RADIUS server type here. The
default setting is SPAP.
Edit: Click to edit the selected entry.
Delete:
Click to delete the entry.
Save:
Click to save the updated configuration. To make
the updates permanent, click Configuration >
Save and Activate.
D-Link DAP-X3060 User Manual 47