Video - Axis P13-B Series User Manual

AXIS P13-B Box Camera Series
The web interface
Speaker test:
speaker test.
Device info
Shows the device information, including firmware version and serial number.
Upgrade firmware: Upgrade the firmware on your device. Takes you to the Maintenance page where you can do a firmware
upgrade.
Time sync status
Shows NTP synchronization information, including if the device is in sync with an NTP server and the time remaining until
the next sync.
NTP settings: View and update the NTP settings. Takes you to the Date and time page where you can change the NTP settings.
Security
Shows what kind of access to the device that is active, and what encryption protocols are in use. Recommendations to the settings
are based on the AXIS OS Hardening Guide.
Hardening guide: Link to AXIS OS Hardening guide where you can learn more about cybersecurity on Axis devices and best
practices.
Connected clients
Shows the number of connections and connected clients.
View details: View and update the list of connected clients. The list shows IP address, protocol, port, state, and PID/process
of each connection.
Ongoing recordings
Shows ongoing recordings and their designated storage space.
Recordings: View ongoing and filtered recordings and their source. For more information, see Recordings on page 33
Shows the storage space where the recording is saved.

Video

Click to play the live video stream.
Click to freeze the live video stream.
Click to take a snapshot of the live video stream. The file is saved in the 'Downloads' folder on your computer. The image
file name is [snapshot_YYYY_MM_DD_HH_MM_SS.jpg]. The size of the snapshot depends on the compression that the specific
web-browser engine where the snapshot is received applies, therefore, the snapshot size may vary from the actual compression
setting that is configured in the device.
: Calibrate the speaker. Takes you to the Speaker test page where you can do the calibration and run the
20