Axis P13-B Series User Manual page 14

AXIS P13-B Box Camera Series
Configure your device
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add the overlay text:
1. Go to Video > Overlays.
2. Under Overlays, select Text and click
3. Enter #D in the text field.
4. Choose text size and appearance.
5. To position the text overlay, click
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select Object Analytics.
4. In the list of actions, under Overlay text, select Use overlay text.
5. Select a video channel.
6. In Text, type "Motion detected".
7. Set the duration.
8. Click Save.
Note
If you update the overlay text it will be automatically updated on all video streams dynamically.
Provide visual indication of an ongoing event
You have the option to connect the AXIS I/O Indication LED to your network camera. This LED can be configured to turn on whenever
certain events occur in the camera. For example, to let people know that video recording is in progress.
Required hardware
• AXIS I/O Indication LED
• An Axis network video camera
Note
For instructions on how to connect the AXIS I/O Indication LED, see the installation guide provided with the product.
The following example shows how to configure a rule that turns on the AXIS I/O Indication LED to indicate that camera is recording.
1. Go to System > Accessories > I/O ports.
2. For the port that you connected the AXIS I/O Indication LED to, click
to set the normal state to Circuit open.
3. Go to System > Events.
.
and select an option.
14
to set the direction to Output, and click