Axis P13-B Series User Manual page 22

AXIS P13-B Box Camera Series
The web interface
the maximum frame rate is 30 fps. If you take a snapshot while adaptive stream is turned on, it will use the image
resolution selected by the adaptive stream.
• Level grid: Click
to hide it.
• Pixel counter: Click
also define the pixel size of the box in the Width and Height fields.
• Refresh: Click
• PTZ controls
Click to show the live view at full resolution. If the full resolution is larger than your screen size, use the smaller image to
navigate in the image.
Click to show the live video stream in full screen. Press ESC to exit full screen mode.
Installation
Capture mode
the capture mode, it can affect many other settings, such as view areas and privacy masks.
Mounting position
Power line frequency: To minimize image flicker, select the frequency your region uses. The American regions usually use 60 Hz.
The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, check with the local authorities.
Rotate: Select the preferred image orientation.
P-Iris lens: Select the installed and supported lens. Restart the camera for the changes to take effect.
Zoom: Use the slider to adjust the zoom level.
Focus: Use the slider to manually set the focus.
AF: Click to make the camera focus on the selected area. If you don't select an autofocus area, the camera focuses on the
entire scene.
Autofocus area: Click
Reset focus: Click to make the focus return to its original position.
Note
In cold environments, it can take several minutes for the zoom and focus to become available.
Image correction
to show the level grid. The grid helps you decide if the image is horizontally aligned. Click
to show the pixel counter. Drag and resize the box to contain your area of interest. You can
to refresh the still image in the live view.
: Turn on to display PTZ controls in the live view.
: A capture mode is a preset configuration that defines how the camera captures images. When you change
: The orientation of the image can change depending on how you mount the camera.
to show the autofocus area. This area should include the area of interest.
22