How To Detach The Stand And The Base - BenQ G Seris User Manual

How to detach the stand and the base

1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage
the monitor surround and controls.
2. Remove the monitor stand.
Push down the stand gently until you cannot go
further so you can see the release button clearly.
Insert a pointed object such as a screwdriver to the
hole above the monitor stand arm, and then push
the screwdriver against the release button inside
the hole. Pull the monitor stand backward away
from the monitor.
3. Remove the monitor base.
Hold the monitor stand arm with one hand, and
push the locking clips to detach the monitor base
from the stand arm.
Release button
33
2
1
2
1