Tricity Bendix 1568 Operating Instructions Manual page 27

B. TO SET THE TIMER TO SWITCH 'OFF' ONLY
Follow points 1-3 previously then:
5. Set the LENGTH OF COOKING
TIME required.
6. Set the oven to the required
temperature.
7. Tocheck the stop time.
NOTES:
Push in the cooking hours button, at the same
time turn the setting knob until cooking time
is entered in the display. Release the button.
The auto display will glow.
The oven indicator light should be ON.
The stop time can be checked at any time
during the cooking period by pressing the
stop button. The stop time will be displayed.
1. The auto display will remain on during an automatically timed period.
2. The time of day cannot be altered whilst the auto symbol is lit.
3. The oven indicator neon will cycle on and off during the cooking time as usual.
4. Once the controls have been set it is possible to check the times which have been set or the
remaining cooking time by pressing the appropriate button.
5. At the end of the timed period an audible signal will be heard.
6. A programme may be cancelled by returning the cooking hours to zero (press the counting
hours button and at the same time turn the setting knob). Release all buttons. The auto display
will now flash. This acts as a reminder to reset the appliance to manual.
7. The cooking symbol will glow whilst the oven is on or if it is in the manual mode.
TO RETURN THE COOKER TO MANUAL OPERATION
Follow the steps below to ensure that after use the oven is returned to manual, otherwise it will not
operate.
At the end of a timed cooking operation
the auto light will flash.
Turn oven control to off position °O'.
Depress the manual selector button.
Turn the oven control on to check that the
oven operates manually.
Turn oven controls OFF.
25
The button will sound for two minutes. To
switch off press any button.
The auto display will continue to flash.
The auto display will go out and the cooking
symbol will light.
The oven indicator light will glow
No indicator lights should operate.