Cleaning The Inside Surface Of The Hood; Cleaning The Control Panel; Aluminium Filter; Carbon Filter (Usage Without A Flue) - Beko BHCA99642BH User Manual

Plastic parts and painted surfaces
• Clean plastic parts and painted surfaces
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.
6.2 Cleaning the inside surface of the
hood
Follow the cleaning steps described in the
"General Cleaning Information" section ac-
cording to the surface types in your
product.
The inner surface of the product
and the parts inside may have
sharp surfaces. Be careful while
cleaning.

6.3 Cleaning the Control Panel

• When cleaning the panels with knob-con-
trol, wipe the panel and knobs with a
damp soft cloth and dry with a dry cloth.
Do not remove the knobs and gaskets un-
derneath to clean the panel. The control
panel and knobs may be damaged.
• While cleaning the inox panels with knob
control, do not use inox cleaning agents
around the knob. The indicators around
the knob can be erased.
• Clean the touch control panels with a
damp soft cloth and dry with a dry cloth.
If your product has a key lock feature, set
the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.

6.4 Aluminium Filter

This filter serves to retain oil particles in the
air. It is recommended to clean the filter
once a month under normal usage. To
achieve this:
1. Remove the aluminium filters.
2. Wash the filters in water using liquid de-
tergent and reinstall after drying.
Aluminium filters may change colour as
they are washed; this is normal and does
not require replacing your filters.
You can also wash the aluminium
filter in the dishwasher. (max. 70
°C)
Removing aluminium filters
1. Open hood cover upwards and pull alu-
minium filter lock downwards as shown
in the figure.
2. Gently pull the filter towards you first
and pull it upwards to remove it from its
slot.
3. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.
6.5 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without
a flue, you should replace your carbon fil-
ters every 4 months in normal use. You
can obtain the carbon filter from Author-
ized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.
EN / 17
EN
FR
DE