First Use; Initial Cleaning; Using The Hood - Beko BHCA99642BH User Manual

Table of Contents

Advertisement

Available languages

Available languages

4 First Use

Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.

4.1 Initial Cleaning

1. Remove all packaging materials.

5 Using the Hood

The hood has an engine with various
speeds. For a good performance, we re-
commend using low speeds under normal
conditions and high speeds in case of
strong odour and vapour condensation.
The program is cancelled if power
is cut when any program in your
hood is active.
1
Lamp key
2
On-Off/Speed 1 key
3
Speed 2 key
4
Speed 3 key
Operating the hood
1. Touch the speed level key you have se-
lected to operate the hood.
ð The set speed level key lights up.
2. You can touch the other speed level
keys to change the speed level.
When in operation, the product will
run for a maximum of 6 hours if no
key is touched.
Turning off the hood
1. To turn the hood off, touch again the key
of the level on which the hood is operat-
ing or
key.
2. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
If you touch the
function active except the lamp,
then the function is cancelled.
Operating the lamp
1. Touch the
The illumination lamps operate for
a maximum of 12 hours.
Turning off the lamp
1. You can turn it off by touching the
key again.
Setting the lamp illumination intensity
You can use the intensity of your hood's il-
lumination lamps at 2 different levels: high
and low.
1. Touch the
ð Hood lamp lights. If you touch the
key again within the first 1
minute, the lamp will continue to
light at the low illumination level.
2. To set the lamp illumination level back
to high, first turn off the lamp by touch-
ing the
touching the
key again within the first 1 minute.
ð The lamp will continue to light at
the high illumination level.
Setting the lamp illumination colour
You can use the colour of your hood's illu-
mination lamps in 3 different shades.
1. With the hood lamp turned on, touch
key for more than 2 seconds.
EN / 14
key with any
key to operate the lamp.
key to operate the lamp.
key. Turn it on again by
key and touch the
EN
FR
DE

Advertisement

Table of Contents
loading

Table of Contents