Setting Up Your Device - Gator GTKPRO3 User Manual

1
COVER REMOVAL
Gently remove the top
cover using a plastic pry
tool from both sides. Then
remove the top cover.
4
PLACING BATTERY
Place the battery inside the
casing. Make sure the
adhesive tape sticks to the
casing.
IMPORTANT: Do not insert the included SIM card in any other device other than this tracker. Doing
so will permanently disable the SIM. Take a photo of the top of your unit with your smart phone or to
notate the IMEI number of your device. You will need this in order to register the device on the server.
2
MICRO-SIM CARD INSERT
Insert the supplied M2M
Micro-SIM card. Make sure that
Micro-SIM card cut-off corner
looks as pictured above.
5
CONNECTING BATTERY
Connect the internal battery
to the PCB.
3
REMOVING PROTECTION
Remove the adhesive tape
protection from the battery.
6
REATTACH COVER
Replace the top cover.
Your device is ready to be
connected.
9