Table of Contents
Advertisement
(Here are some additional points to be aware of)
Wiring colours
- When wiring up your device, please pay careful attention to the colours of the wires.
Connecting the constant power wire
- Some vehicles have a function where after some time certain circuits will be completely switched off,
we recommend connecting the constant power wire either directly to the battery or to a circuit that
never switches off.
- Ensure the supplied external fuse is installed at the source.
Connecting the ignition power wire
- Ensure the device is connected to ignition power, not accessory power.
- Be sure to select an ignition source that does not switch off when the starter is cranked.
- Ensure the supplied external fuse is installed at the source.
Connecting the ground wire
- Ensure the ground wire is connected to the vehicle chassis or a metal part that is connected to the
chassis.
- We recommend terminating the cable with a ring terminal that is a suitable size for where you are
fixing the cable (not included).
After wiring is complete
- This device comes pre-configured and does not require any post installation configuration/setup.
- If operating correctly the unit will make immediate contact with the cellular network.
- The SIM card will authenticate that it is in the correct device and activate.
- The device will then make contact with the tracking server and will be ready to add to your account
when you go online.
11
Advertisement
Table of Contents
