Table of Contents
Advertisement
PS-FL1/FL1C
INSTALLING A CARTRIDGE OTHER THAN
THE ONE SUPPLIED
Since the cartridge supplied with this turntable is unified with the
shell, if you want to use a different cartridge, you will need an ap-
propriate cartridge shell (Sony SH-151). The total weight of the car-
tridge and shell must be between 7.5 grams and 12 grams.
Connect the lead wires of the shell to the corresponding pins on the
cartridge and install the cartridge into the shell as illustrated. For
details on the connection of the lead wires, refer to the instruction
manuals of the cartridge and shell.
Place the cartridge
shell exactly over the
diagram and adjust
the position of the
cartridge.
Cartridge shell
Stylus tip over this point
OVERHANG CHECK *3
@ Place the rubber mat upside down.
Fett
ee
Correct overhang
*3 Overhang
~16—
MAINTENANCE
Stylus
Cabinet
Rubber mat
When the rubber mat becomes dirty, wipe it gently with a soft cloth
slightly dampened with water.
Lubrication
The turntable requires no periodic lubrication. The motor shaft is
lubricated at the factory for the life of the turntable.
Advertisement
Table of Contents
