URBAN OUTFITTERS TULIP Assembly Instructions

TULIP STORAGE SHELF
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
#2 Phillips head screwdriver, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Anti-Tip Hardware must be in place to ensure safety from tipping.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Natural Fiber products are designed to be used under cover.
Clean spills with a damp cloth and warm water only.
Do not use any harsh chemicals, abrasive cleaners,
silicone or alcohol-based agents on woven materials.
Before cleaning any part test a small spot in a hidden area.
PARTS INCLUDED:
(A) Screw JP
(#8 x 3/4") x1
(F) Shelf
x1
02.16.24 REV 1
(B) Screw JP (C) Plastic Anchor
(#8 x 2") x1
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(D) Tipping Restrain
(S6) x1
(E) Bracket
x1 x2
Page 1 of 2