URBAN OUTFITTERS Tara Bed Tray Assembly Instructions

Tara Bed Tray
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
ead re dr er
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Top Panel
(21 x 11 x 1.7") x 1
or
(53.3 x 27.9 x 4.3cm)
A) Bolt
(D 0.47 / 0.24 x 1.38") x 4
or
(D 12 / 6 x 35 mm)
D) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
05.03.2024 REV1
2) Leg
(12.17 x 8.27 x 0.7") x 1
or
(30.9 x 21 x 1.8cm)
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x 4
(D 12 / 6 x 2 mm)
E) Cam lock
(D 0.6 x 0.47") x 4
(D 15 x 12 mm)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
3) Leg
(12.17 x 8.27 x 0.7") x 1
or
(30.9 x 21 x 1.8cm)
or
or
URBAN OUTFITTERS
4) Handle
(1.38 x 1.38 x 1.22") x 1
or
(3.5 x 3.5 x 3.1cm)
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 4
or
(D 16 / 6 x 2 mm)
F) Cambolt
(D 0.24 x 1.57") x 4
or
(D 6 x 40 mm)
Page 1 of 2