URBAN OUTFITTERS Tara Bookshelf Assembly Instructions

Tara Bookshelf
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver, Drill , Hammer, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Two people reccommended for assembly.
Anti-Tip Hardware must be in place to ensure safety from tipping.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Top Panel
(48 x 15 x 0.7") x 1
or
(121.9 x 38.1 x 1.8cm)
4) Legs
(14 x 12.5 x 3.5") x 8
or
(35.6 x 31.8 x 8.8 cm)
A) Bolt
(D 0.47 / 0.24 x 1.38") x 24
or
(D 12 / 6 x 35 mm)
05.03.2024 REV1
2) Bottom Panel
(48 x 15 x 1.8") x 1
(121.9 x 38.1 x 4.5cm)
5) Shelves
(48 x 15 x 0.7") x 2
(121.9 x 38.1 x 1.8cm)
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x 25
or
(D 12 / 6 x 2 mm)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
or
or
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 26
or
(D 16 / 6 x 2 mm)
URBAN OUTFITTERS
3) Legs
(14 x 12.5 x 1.5") x 4
or
(35.6 x 31.8 x 3.8 cm)
6) Middle shelf
(48 x 15 x 0.7") x 1
or
(121.9 x 38.1 x 1.8cm)
D) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
Page 1 of 4