Page 2
Double check the power cord polarity. If you plug the module backwards you might damage its electronic circuits. If you flip over your VCV RANDOM, you will find the “RED” mark at the PCB power connector, which must match the colored line on the ribbon cable.
Description VCV Random is the hardware version of a well-known classic from the VCV Rack fundamental library. A random CV generator with 4 types of randomness and a triggerable sample-and-hold function. Its sliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE).
Program the Module. Click on 'Program'. The firmware update process should complete in just a few seconds. Done! Now VCV RANDOM is updated. DON’T NORMALIZE NORMALIZE CV BOOT...
• This guarantee covers Any defect in the manufacturing of this product. Replacement or repair, as decided by NANO Modules. • This guarantee does not cover Any damage or malfunction caused by incorrect use , such as, but not limited to: Power cables connected backwards.