Elation PROTEUS RADIUS User Manual page 30

S YS T E M M E N U
3. Program Selection for Auto Pro Part
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Select Programs".
• Press ENTER to confirm.
• elect "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3", and select which Secondary
program is to be sent. Selection "Part 1" means, that the Secondary unit runs the same
program as the master units.
• Press ENTER to confirm.
• Press MODE/ESC to return to the main menu.
4. Program Selection for Edit Program
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Edit Program".
• Press ENTER to confirm.
• Select the desired program to edit specific scenes into a specific program.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Edit Scenes".
• Press ENTER to confirm.
• Select desired scene numbers. A maximum of 250 scenes can be programmed.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
Auto Pro Auto Pro
Example:
Part 1 Part 2
Program 2 includes scenes: 10, 11, 12, & 13 Program 4 includes scenes: 8, 9, & 10 Program 6
includes scenes: 12, 13, 14, & 15 Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
The 3 Secondary groups run the Auto Program in certain time segments. (See diagram below)
Auto Pro Auto Pro
Part 3 Part 1
Part 1:
Scene 10 Scene 11
Part 2:
Scene 8 Scene 9
Part 3:
Scene 12 Scene 13
Auto Pro Auto Pro
Part 2 Part 3
Scene 12 Scene 13
Scene 10 Scene 8
Scene 14 Scene 15
30
Auto Pro Auto Pro Auto Pro
Part 1 Part 2 Part 3