Elation PROTEUS RADIUS User Manual page 18

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKET WITH CLAMP INSTALLATION
When mounting the fixture to a truss, be sure to secure appropriately rated professional
grade rigging clamps to the included Omega Brackets using an M10 or M12 screw fitted
through the center hole of the Omega Brackets. This fixture requires the installation of
two Omega brackets and two clamps for secure truss mounting.
M o u n t Tr u s s C l a m p t o
Omega Bracket with M10 or
M12 screw fitted through
the center hole of Omega
Bracket.
The fixture also provides a
built-in attachment point for a
SAFETY CABLE. Be sure to only
use the designated attachment
point for the safety cable and
never secure a safety cable to a
carrying handle.
ALWAYS ATTACH A SAFETY CABLE WHENEVER
INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THAT THE FIXTURE
WILL NOT FALL IF THE CLAMP FAILS.
MOUNTING THE FIXTURE ON A TRUSS USING CLAMPS
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp to the bottom of the fixture using (2x) minimum grade 8.8 steel (2x)
M12x25mm bolts fitted through the mounting hole of the Clamp. The fixture provides built-in
rigging points for a SAFETY CABLE (not included). Be sure to only use one of the designated
rigging points for the safety cable and never secure a safety cable to a carrying handle.
Omega Brackets
18