Elation PROTEUS RADIUS User Manual page 20

I N S TA L L AT I O N G U I D E L I N E S
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a
Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior of all
connected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
POWER AND DATA CABLES
TO MAINTAIN THE IP66 RATING INTEGRITY OF THE FIXTURE, ALL CABLES MUST
BE RUN TOWARDS THE GROUND TO PREVENT WATER ACCUMULATION AROUND
THE CONNECTIONS.
SYSTEM MENU LCD DISPLAY
RJ45 DATA CABLES
T H E I N C LU D E D R J 4 5 DATA CA B L E I S FO R F I XT U R E TO F I XT U R E
INTERCONNECTIONS ONLY! THE RJ45 CABLE CONNECTORS MAY NOT BE
COMPATIBLE WITH OTHER RJ45 OR ETHERNET TYPE CONNECTORS.
CABLES CABLES
20