Select A Location - Sonos Klipsch AW-650 User Manual

SONOS USER GUIDE
Back panel
Join button
USB-C port
Power button
Bluetooth/WiFi
toggle button
Handle
Charging
Charging base
AC power
Charging contacts
Charging on the go

Select a location

You can put your speaker just about anywhere. Here are a few guidelines:
• Move is made to give you powerful sound anywhere—auto Trueplay tuning periodically balances the
sound for wherever you are and whatever you're listening to. The microphone has to be on for automatic
tuning so if you don't leave the microphone on all the time, turn it on for a few minutes whenever you
move your speaker so it can automatically adjust the sound for your new surroundings.
• Move sounds great even when placed next to a wall or on a shelf. For best performance, leave at least
1" (2.5 cm) space around the back of the speaker.
Press to connect to your Sonos system during setup.
Use a compatible USB-C charger for charging on the
go.
•
USB port may also be used for diagnostic purposes.
(It can't stream large data files, like some music
files).
Note: USB-C cable not included.
Press to power on; press and hold to power off.
If Move is off the charging base, it goes to sleep to save
battery when you're not using it. Just press the power
button to wake it up.
Toggles between Bluetooth and WiFi. Use WiFi for
setup and for listening at home—switch to Bluetooth
wherever WiFi isn't available.
Allows for easy lifting and carrying so you can take the
speaker wherever you go.
•
Just set Move on the charging base for easy
recharging—no extra wires or cables needed.
•
Charging base is for indoor use only—be sure to
keep it dry.
•
Move's remaining battery life is always visible in the
Sonos app.
100-240 VAC, ~50/60 Hz, 1.2 A. Output: 18.0 VDC,
2.5 A, 45.0 W
Make sure the speaker is seated properly in the base
and the charging contacts are touching.
Use a compatible USB-C charger.