Controls And Lights; Connector Panel; Select A Location - Sonos S37 User Manual

SONOS USER GUIDE
S37
The Sonos S37 takes your audio experience to the next level.
• Instantly adds a dimension of deep bass impact to your audio listening experience.
• Position it upright on any floor surface near the speaker you're using it with.
• See Getting started when you're ready to add an S37 to your Sonos system.

Controls and lights

Join button
Status light

Connector panel

Ethernet port
AC power (mains) input

Select a location

S37 is designed to sit on the floor. For the best sound experience, place S37 upright in a corner or close to a
wall near the speaker you'll use it with.
Note: After S37 is paired with a Sonos speaker, you won't see it displayed separately in Rooms. Any
changes you make to that Sonos speaker (volume, mute, music selection) will also affect the S37.
Pair S37 with a different speaker
You can easily change the Sonos speaker you're using with S37. If you move S37 to a new room, plug it in
and wait for the status light to stop flashing before you try to change product settings.
Go to Settings > System and choose the product your S37 is paired with. (It appears as room (+S37) in
1.
your list of products.)
Remove the S37.
2.
Connect S37 to a different Sonos product or you can choose not to use the S37 right now. It will appear
3.
S37 (unused)
on Rooms as
Press to connect during setup.
Indicates S37's status. Learn more
Use an Ethernet cable if you want to connect to a router,
computer, or network-attached storage (NAS) device
(optional).
Use only the supplied power cord to connect to a power
outlet (using a third party power cord will void your
warranty). Be sure to use the proper power adapter for
your country.
until you connect it with another Sonos speaker.