Table of Contents
Advertisement
SONOS USER GUIDE
Controls and lights
Volume control
Play/Pause
Next/Previous
Status light
Note: If you don't want anyone (like a child) to control playback or change the volume using the speaker
touch controls, you can disable them in the room's settings.
Connector panel
Join button
Ethernet port
AC power (mains)
input
Select a location
You can put your speaker just about anywhere. Here's a few guidelines:
• Sonos One SL sounds great even when placed next to a wall or on a shelf. For best performance, leave
at least 1" (2.5 cm) space around the back of the speaker.
• It's humidity-resistant so you can use it in the bathroom.
• It's not water-resistant so don't put it near water or leave it in the rain.
Speaker mounts and stands
For wall mount kits or stands, tailored to perfectly fit your Sonos products, see Accessories on our website.
•
Touch and hold to quickly change the volume:
•
Volume up (right); Volume down (left).
•
Press once to play or pause music.
•
Press and hold to add the music that's playing in
another room.
•
Swipe right across the touch controls to skip to the
next song.
•
Swipe left to go to the previous song.
Note: You can't skip forward or go back when listening
to a radio station.
Indicates the status. Learn more
If the light is distracting, you can turn it off in your room's
settings.
Press to connect during setup.
Use an Ethernet cable if you want to connect to a router,
computer, or network-attached storage (NAS) device
(optional).
Use only the supplied power cord (using a third-party
power cord will void your warranty).
Note: Insert the power cord firmly until it is flush with
the bottom of the speaker.
Advertisement
Table of Contents
