Table of Contents
Advertisement
SONOS USER GUIDE
• Phase Control: Choose 0° or 180° to set the phase control for your Sonos Sub or third-party subwoofer.
This can help integrate your subwoofer with other speakers in the room. (You'll see this setting when you
pair a Sonos Sub or third-party subwoofer with a Sonos Amp or Connect:Amp.)
• Crossover Frequency: Adjust the frequency at which the sound transitions to the subwoofer. By default
this is 80 Hz.
You may wish to choose a different crossover frequency if:
• The main speakers sound distorted at high volumes—moving to a smaller speaker size setting can
help.
• Your attention is drawn to Sub's location while listening to music—moving to a larger speaker size
setting can help.
1
Compact
2
3
4
Bookshelf / Ceiling
5
6
Floor
7
• Recalibrate Sub. If you move your Sub to another location, purchase new speakers, or just want to
adjust the sound after initial setup, you can recalibrate Sub (Android devices only).
• Select the size of your stereo speakers (Connect:Amp only).
• Press Play
to compare the volume of two test sounds, A and B, and then select No Difference,
A is louder or B is louder.
• Press Play
to listen to a test sound, and then select the level you prefer.
Pair Sub with a different speaker
You can easily pair Sub with a different Sonos speaker (except the Sonos Connect).
If you're moving Sub to a new room, wait for the status light to stop flashing after you plug it back in.
Go to the sound settings for the room that's associated with your Sub.
1.
It appears as room (+Sub) in your list of rooms.
Remove Sub.
2.
You can pair Sub with a different Sonos product or choose not to use Sub right now. It will appear in
3.
as Sub (unused) until you pair it with another Sonos speaker.
110 Hz
100 Hz
90 Hz
80 Hz
70 Hz
60 Hz
50 Hz
Advertisement
Table of Contents
