Charging Base - Sonos Klipsch AW-650 User Manual

Table of Contents

Advertisement

SONOS USER GUIDE

Charging base

Charging base
AC power
Average active
efficiency
Efficiency at low
load (10%)
No-load power
consumption
Charging contacts
Important safety information
Please read these instructions and heed all warnings. Keep them in a convenient location and make sure
everyone in the household is aware of them.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos
5.
products. 
If the charging base leaves a mark on wood furniture, remove with wood polish.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that
7.
produce heat.
Do not expose batteries (battery pack or batteries installed) to excessive heat such as sunshine or fire.
8.
Protect the power cable from being walked on or pinched, particularly at plugs, convenience
9.
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
10.
Just set Move on the charging base for easy
recharging.
Charging base is for indoor use only—be sure to
keep it dry.
Move's remaining battery life is always visible in the
Sonos app.
100-240 VAC, ~50/60 Hz, 1.2A. Output: 18.0 VDC,
2.5 A, 45.0 W
90.1%
85.3%
0.07W
Make sure the speaker is seated properly in the base
and the charging contacts are touching.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roam1us1

Table of Contents