Table of Contents
Advertisement
SONOS USER GUIDE
Connect the optical adapter to the TV's optical digital OUT port.
3.
Beam's HDMI port
Note: The optical adapter's port is "D-shaped"—make sure the connector aligns correctly into the port.
Inserting the adapter incorrectly may damage the cable.
If you don't have the app, download it from the app store. You'll use it to set up and control your Sonos
system. See Getting started.
Microphone on/off
Touch
to turn the microphone on and off. (If you don't have a voice service installed, the microphone is
inactive.)
When the microphone light is on, voice control is on and Alexa is ready to respond. When the microphone
light is off, voice control is off.
If you've installed a voice service and the microphone is off, you can still use voice commands. Just press and
hold
while talking to Alexa—no need to start with a wake word. When you release the mic button, voice
control turns off again.
Wall mount
Guidelines
• Use the Beam wall mount kit. You can buy it on www.sonos.com. Follow the instructions in the kit.
• Keep 1" (25mm) space (minimum) above Beam so you can reach the touch controls.
• If you're mounting above the TV, make sure you can reach the touch controls.
• For best sound quality, keep both ends of Beam at least 1' (30cm) from a wall or other obstruction.
TV's optical digital OUT port
Optical adapter attached to
HDMI cable
Advertisement
Table of Contents
