Table of Contents
Advertisement
DRIVE CHAIN SLACK ADJUSTMENT
3 - 14
5. Install:
• Drive chain 1
• Joint 2
• Master link clip 3
CAUTION:
Be sure to install the master link clip to the
direction as shown.
a Turning direction
6. Lubricate:
• Drive chain
Drive chain lubricant:
SAE 10W-30 motor oil or
suitable chain lubricants
DRIVE CHAIN SLACK ADJUSTMENT
1. Elevate the rear wheel by placing the suit-
able stand under the engine.
2. Check:
• Drive chain slack a
In the center between the drive axle and
rear wheel axle.
Out of specification → Adjust.
Drive chain slack:
40 ~ 53 mm (1.6 ~ 2.1 in)
NOTE:
Before checking and/or adjusting, rotate the
rear wheel through several revolutions and
check the slack several times to find the tight-
est point. Check and/or adjust chain slack with
rear wheel in this "tight chain" position.
INSP
ADJ
New
Advertisement
Table of Contents
