DAAN Groups Voltz Toys DG-8CA02 User Manual page 7

1. FRONT GUARD BAR ASSEMBLY
Parts required: #2, #19
Start installation with upside-down position. Align the guard bar with the
opening in front of the unit, fix the connection with 4x M4*10mm screws as
shown on the diagram.
#19
#2
2. FRONT AXLE ADJUSTMENT
Parts required: #23
Adjust the front axle unit as shown on the diagram. Use M6 bolt/nut set to
fix the connection. (Note: do not over tighten the connection, confirm the
joint could move around smoothly.)
#23
6