Firmware Updates; Currently Installed Vrx1 Firmware; Updating Vrx1 Firmware - Zaxcom VRX1 User Manual

Zaxcom VRX1

Firmware Updates

VRX1 ships with the latest firmware version installed. As newer firmware becomes available, it can be
downloaded from the Zaxcom website:
• http://www.zaxcom.com/software-updates
Newer versions of beta firmware may be found on the Zaxcom forums:
http://www.zaxcom.com/forums
•

Currently Installed VRX1 Firmware

To confirm the current installed VRX1 firmware, hold down the * key on bootup for a voice prompt summary of
the installed firmware version.

Updating VRX1 Firmware

1. Connect VRX1 to a computer via USB-C
2. Press and hold the A/B and * button within 3 seconds of powering on.
• The VRX1 will now appear as a mountable drive on the computer
3. Open the VRX1 drive using your computer's file browser
• Download the VRX1 firmware *.UFZ file and copy it onto the card.
The unit will disconnect from the computer when done. Power cycle the unit afterward.
•
Note: If the unit does not boot, there is a way to force it into a firmware update

mode by shorting a pad on the battery board and ground with tweezers while
powering on.
Page 14
VHF Receiver