Vrx1 Presets Continued; Manually Restore Factory Default; Confirm Vrx1 Program Status - Zaxcom VRX1 User Manual

Zaxcom VRX1

VRX1 Presets Continued

PRESET #3: A/B Selects, star Delay, 1&3 enabled, announcements on, delay toggled, no voting, mono, led on,
analog mode. Similar to Preset 1 except:
ABbutton = CHANNEL
StarButton = DELAY TOGGLE
BootAnnounce = ON
Delay = 90ms
BassBoost = OFF
Channel[1] Enabled
Channel[3] Enabled

Manually Restore Factory Default

To restore factory defaults, hold A/B key while powering on, and repeatedly hit the * key immediately. Use the
A/B key to choose from 3 default settings. After choosing a desired factory setting, wait three seconds and then
power the VRX1 off.

Confirm VRX1 Program Status

To confirm the current VRX1 program status and hear the firmware version, hold down the * key on bootup for
a voice prompt summary of the current channel selection status.
Page 13
VHF Receiver