Kathy Ireland PACIFICO 53533 Use And Care Manual page 14

Optional Installation - Storage Bracket
Mounting the remote control holder
NOTE: A storage bracket is provided for holding your remote
control when not in use. If you desire to use the bracket, install
it on a wall that is away from excess heat or humidity.
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle.
□
Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□
Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Screw cover plate
14