Kathy Ireland PACIFICO 53533 Use And Care Manual page 12

Assembly - Attaching the Fan Blades
1
Attaching the fan blades
NOTE: Take care not to scratch fan motor assembly when
installing blades.
□
Position the fan blade (F) with the two alignment tabs
facing down for installation into the two grooves on top
of the flange.
□
Slide a blade (F)(holes facing up) onto the flange and
seat against the fan motor assembly.
□
Mount the blade to the flange using three screws (AA)
provided.
□
Make sure all the screws are firmly tightened.
□
Repeat this step for the remaining blades.
Assembly - Attaching the Light Kit
1
Installing the light kit pan
□
Remove one screw (FF) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
□
Re-install the screw (FF) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
F
FF
12
AA
E
E
G