Advertisement
6.4 ADDRESS FOR MAINTENANCE REQUIREMENTS
You are advised to contact the seller of the machine first of all.
For any information or orders for spare parts, specify the type
of machine, its serial number and the electrical specifications.
The manufacturer reserves the right to modify and make impro-
vements to the products without giving prior notice.
Conformity with regulations
The machine has been designed and manufactured in
compliance with:
- Machine directive 2006/42 EEC,
- EMC directive 2004/108EC.
- 2011/65/EU Directive on the restriction of the use of certain
hazardous substances
- 'WEEE' Directive 2002/96/EC
The "
" symbol on the products indicates that it should not
be considered as household waste. Alternatively, it should be
taken to the waste electrical and electronic equipment site. By
ensuring that the product is duly disposed of correctly, you are
contributing to the prevention of harmful effects on the environ-
ment and human health which could occur due to uncontrolled
scrapping of this product. For more detailed information about
recycling this product, please contact the sales department or
dealer for your product, the after-sales service or the appropriate
waste disposal service.
- "Waste" 2006/12/EC
The machine is designed so as to reduce the amount of waste
or its harmfulness and risks of pollution as much as possible.
Make sure the recycling conditions are adhered to.
- «Packaging and packaging waste» 94/62/EC
The machine packaging is designed so as to reduce the amount
of waste or its harmfulness and risks of pollution as much as
possible.
Make sure to dispose of the different parts of the packaging at
the suitable recycling sites.
- The European standards :
EN 454 beaters - mixers. Safety and hygiene regulations.
This conformity is certified by:
Electromix 5 GB 11 2023
Supplier's stamp
Date of purshase : ...............................................
- The CE conformity mark, attached to the machine,
- The corresponding EC certificate of conformity.
- This instruction manual, which must be given to the operator.
Acoustic specifications:
- the acoustic pressure level measured in compliance with the
EN ISO 11201.1-EN ISO 3744 test code is less than 77 dBA
Protection indices as per the EN 60529-2000 standard:
- IP55 electrical controls
- IP23 overall machine
Electromagnetic compatibility in compliance with the fol-
lowing standards:
- EN55014-1: Emission.
- EN55014-2: Immunity.
Integrated safety:
- The machine has been designed and manufactured in com-
pliance with the relevant standards and regulations, mentioned
above.
- Before using the machine, the operator must be trained to use
the machine and informed of any possible residual risks.
Food hygiene:
The machine is made from materials that conform to the following
regulations and standards:
- directive 1935/2004/EC: materials and articles intended to come
into contact with food.
- Standard EN 601- : cast aluminium objects in contact with food.
The surfaces of the food area are smooth and easy to clean. Use
detergents that are approved for food hygiene and respect the
instructions for their use.
6
Advertisement
