Conformity With Regulations - Electrolux BE5 Manual

Conformity with regulations

The machine has been designed and manufactured in
compliance with:
- Machine directive 2006/42 EEC,
- EMC directive 2014/30/ EU.
- 2011/65/EU Directive on the restriction of the use of certain
hazardous substances
- 'WEEE' Directive 2002/96/EC
The " " symbol on the products indicates that it should not
be considered as household waste. Alternatively, it should be
taken to the waste electrical and electronic equipment site.
By ensuring that the product is duly disposed of correctly,
you are contributing to the prevention of harmful effects on
the environment and human health which could occur due
to uncontrolled scrapping of this product. For more detailed
information about recycling this product, please contact the
sales department or dealer for your product, the after-sales
service or the appropriate waste disposal service.
- "Waste" 2006/12/EC
The machine is designed so as to reduce the amount of waste or
its harmfulness and risks of pollution as much as possible.
Make sure the recycling conditions are adhered to.
- «Packaging and packaging waste» 94/62/EC
The machine packaging is designed so as to reduce the
amount of waste or its harmfulness and risks of pollution as
much as possible.
Make sure to dispose of the different parts of the packaging
at the suitable recycling sites.
- The European standards :
EN 454 beaters - mixers. Safety and hygiene regulations.
BE5 - BE8 GB 04 2016
This conformity is certifi ed by:
- The CE conformity mark, attached to the machine,
- The corresponding EC certifi cate of conformity.
- This instruction manual, which must be given to the operator.
Acoustic specifi cations:
- the acoustic pressure level measured in compliance with the
EN ISO 11201.1-EN ISO 3744 test code is less than 71,1 dBA
Protection indices as per the EN 60529-2000 standard:
- IP55 electrical controls
- IP23 overall machine
Electromagnetic compatibility in compliance with the fol-
lowing standards:
- EN55014-1: Emission.
- EN55014-2: Immunity.
Integrated safety:
- The machine has been designed and manufactured in com-
pliance with the relevant standards and regulations, mentioned
above.
- Before using the machine, the operator must be trained to use
the machine and informed of any possible residual risks.
Food hygiene:
The machine is made from materials that conform to the following
regulations and standards:
- - directive 1935/EC: materials and articles intended to come
into contact with food.
- Standard EN 601: cast aluminium objects in contact with
food.
The surfaces of the food area are smooth and easy to clean. Use
detergents that are approved for food hygiene and respect
the instructions for their use.
6