Advertisement
Compliance with regulations
The machine has been designed and manufactured to
comply with:
- Machine directive 2006/42 EEC
- Machine directive CEM 2014 / 30 EU
- 2011/65/EU Directive on the restriction of the use of certain
hazardous substances
2002/96/CEE « WEEE »
The symbol «
» on the product indicates that this product may
not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please
contact the sales agent or dealer for your product, your after-sales
service, or the appropriate waste disposal service.
2006/12/CEE "Waste"
The machine is designed so that it does not contribute, or as
little as possible, to increasing the quantity or harmfulness of the
waste and the risks of pollution.
Make sure to observe the recycling conditions.
94/62/CEE "Packaging and packaging waste"
The packaging for the machine is designed so that it does not
contribute, or as little as possible to increasing the quantity or
harmfulness of the waste and the risks of pollution.
Make sure to eliminate the various parts of the packaging in
appropriate recycling centres.
- To the European standards:
EN 454- machine - mixers. Safety and hygiene regulations
This conformity is certified by:
XBM20/30 GB 05 2016
- The CE compliance mark attached to the machine
- The corresponding CE compliance declaration associated with
the warranty.
- This instruction manual, which must be given to the operator.
Acoustic specifications:
- The acoustic pressure level measured in conformity with the
EN ISO 3743.1-EN ISO 3744 < 70 dBA.
Protection indices as per the EN 60529-2000standard:
- IP55 electrical controls.
- IP23 overall machine.
Integral safety devices:
- The machine has been designed and manufactured in accordance
with the relevant regulations and standards shown above.
- Before using the machine, the operator must be trained to use
the machine and informed of any possible residual risks.
Food hygiene:
The machine is made from materials that comply with the following
regulations and standards:
- Directive 1935/2004/CEE: materials and objects in contact with
foodstuffs
- Standard EN 601- : cast aluminium alloys in contact with
foodstuffs.
- Directive EN 1672-2- : Prescriptions relating to hygiene
The surfaces of the food area are smooth and easy to clean.
Use detergents that are approved for food hygiene and follow
the instructions for their use.
8
Advertisement
