Panasonic CT-36SL13G Service Manual page 9

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0200000000x.html
Chip component installation
1. Put a small amount of solder on the board soldering pads.
2. Hold the chip component against the soldering pads with tweezers or with a miniature alligator
clip and apply heat to the pad area with a 30 watt iron until solder flows. Do not apply heat for
more than 3 seconds.
How to replace flat ic (required tools)
1. Remove the solder from all of the pins of a Flat IC by using a desolder braid
2. Put the iron wire under the pins of the Flat IC and pull it in the direction indicated while heating
the pins using a soldering iron. A small awl can be used instead of the iron wire.
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0200000000x.html (2 of 4)05.12.2008 0:00:25