Eeprom Replacement - Panasonic CT-36SL13G Service Manual

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0300000000x.html

3 EEPROM replacement

TOP PREVIOUS NEXT
If a new EEPROM integrated circuit is replaced for servicing, follow the next procedure once that the
memory is properly assembled:
1. Turn the TV set ON.
2. Enter to service mode.
3. Once inside service mode the first image that appears on-screen is the ID1 register with the
respective address value (FF) like the image below.
Note:
All 3 registers (ID1,ID2,ID3) should appear with FF values if a new EEPROM is assembled.
4. With "VOL" keys adjust the correct value according with the service adjustment table (see
"Service Mode" section in page 15).
5. Change to the next ID switch register with "CH" keys and repeat the same procedure as step 4.
6. When replacing a new EEPROM be sure to set the correct ID switch values for each model.
7. Once that all 3 registers are set with the correct address value, perform all of the remaining
adjustments and servicing.
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0300000000x.html (1 of 2)05.12.2008 0:00:41