http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1000000000x.html
To release screen GND cables from L-Board L11 & L12 connectors, insert a wire in both sides of
connector and pull upwards the cable, then remove the wire.
G-Board
Mated to A-Board by three flexible connectors A1, A2, A3 and D40 from D-Board. To remove this
board, first unplug the four flexible connectors, then RT1 and G4connectors, then pull upwards the
board while unlock the tabs from the chassis tray.
Speakers
Each speaker is secured to a plastic base with 4 screws, and each plastic base is secured to the from
cabinet with two screws.
NOTE
When reassembling speakers be sure to connect the speaker wires to the correct speaker lead (+) (-)
10.1 Disassembly for CRT replacement
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1000000000x.html (3 of 4)05.12.2008 0:01:30
L11 and L12 cables release