Panasonic TOUGHBOOK CF-M34 Series Operating Instructions Manual page 17

Touch Pad
(Basic Operation)
Work Surface
I Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to l^["*j2e "Touch Pad (Advanced)".
note}
The touch pad has been designed to work only when a finger is used. Therefore, do not use
any implement on the touch pad.
,-Basic-Operation-,
Function
Touch Pad Operation
Moving the Cursor
Move the tip of your finger
ightly over the surface.
Tapping/Clicking
Double-Tapping/
Double-Clicking
•Y- -
doubte-dicking
Dragging
i or
Two quick taps, but on
the second tap leaving
your finger down (apply¬
ing pressure) and moving
it on the work surface.
While holding down the
button, moving your fin¬
ger on the work surface.
i-Handling-theTouch-Pad-,
• Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).
• Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
• When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied
with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
17