Panasonic TOUGHBOOK CF-M34 Series Operating Instructions Manual page 14

Starting Up/Shutting Down
Starting Up
Latch
1
Open the display
(T) Lift up the latch.
(2) Lift open the display.
2
Turn your computer on
Slide the power switch as shown and hold it for approximately one second until
the power indicator turns on before releasing it.
r(^m>
After confirming that the power indicator has turned on, avoid the follow¬
ing until Windows has completed loading.
• Connecting or disconnecting the AC adapter.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen for external mouse)
operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When the CPU temperature rises, the computer may not power on to pre¬
vent the CPU from overheating. Should this happen, allow' the computer to
cool down then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
If security indicator (§]) is displayed,
you must first enter your passw-ord. (Q3 "Security Measures")
Upon entering your
password and press-
*nS
C
EnterJ
. If the correct password is input,
um
G
Will Start
Over three incorrect attempts,
or no password is entered for about a minute,
Will Not Start*
(Power off)
*
If
after three attempts the correct password is not input, or
if
no pass-
1
word is entered for about a minute, the computer returns to the condi¬
tion just before the attempt was made to start up the computer.
# When an application or file that was previously displayed
appears on your screen,
the standby or hibernation function has been set. (Gr* "Standby/Hibemation
Functions")
14