1-6
1.6.
ADDITIONAL CHARACTERISTICS
Calibration voltage generator
output
Error limit
Frequency
Additional input
External 2-modulation
Min. required pulse width
Power supply
AC ranges
Power consumption
AC frequency
DC range
DC current
1.7.
OPTIONS
TTL triggering
Internal
External
ECL triggering
Internal
MOTE: Instead of
main time-base triggering is automatically set for T T L or ECL triggering. The level control is not
operative then.
Sweep out MTB
Output voltage
Gate out MTB
Output voltage
Gate out DTB
Output voltage
TV
triggering, you can modify the instrument for TTL or ECL triggering.
1%.
f
2kHz approx.
DC coupled
TTL compatible
"1" is normal intensity
"0" blanks display
1 Ons
...
90
132V
...
195
...
210
270V
45w
...
46
...
20
32V
The correct TTL level is obtained with the AMPLIDIV in
position 2Vldiv.
The correct TTL level is obtained via a 10 : 1 attenuator
probe.
The correct ECL level is obtained with the AMPL/DIV in
position 0.5Vldiv.
+
From - 1.8V to
Output short-circuit protected.
At TTL level: "high" during MTB sweep.
Output short-circuit protected.
At TTL level: "high" during OTB sweep.
Output short-circuit protected.
If
modified the